Is there a work around for Rel Canonical without header access?
-
In my work as an SEO writer, I work closely with web designers and usually have behind the scenes access.
However, the last three clients who hired me have web designers that are not allowing admin access to anyone else (including the clients) outside of their companies/small business.
Is there a work around for the Rel Canonical element that usually is placed in the header? I am using All-In-One-SEO plug-in to address part of this issue.
Sage advice or discussion on this is appreciated!
-
I totally understand, I've been spoiled by working with web designers that are very customer service oriented and who have not held their customers hostage...so this has been very disheartening on several levels.
All three of the clients have been referred to other web designers per my recommendation. One has moved, one is waiting for a little while, and the other has not decided yet.
I have managed to do some canonical meta work using the plug-in and appreciate your sharing the other options available.
-
I hate to say this, but I'm going to, because I have no tolerance for design companies and hosting companies who hold clients hostage (and I've worked at a design/hosting company, so I don't buy 98% of the excuses for that behavior)...
Is there any way to hack the plug-in or META data, based on the access you DO have. For example, the META description sits in the header. What if you entered a description like:
This is my meta description.">
Short of that, there's not a lot you can do with no access. Push comes to shove, you may have to let the client know that, to do your job, they need to divorce the design from the hosting. A WordPress CMS can live anywhere - there's no reason the design company should be sitting on it.
Actually, just for reference, I'll add that there are other solutions, but they're usually very technical and somewhat costly. For example, some SEO companies have proxy hardware/software that sits on top of existing sites. What it basically does is inject code on top of what gets served up by the web server. That way, the SEO company can add tags, etc. without direct access to the server. You still need access to the host, though (or cooperation), and typically this is an enterprise-level solution (in other words, $$$).
-
Thanks for chiming in. Unfortunately, access is a big issue for the web design company and so the only changes I can get in are those I can do using the plug-in and some of the meta fields. Just attempting to prevent dilution and drive the link juice to the main content rather than the transient/time contingent information.
It is a private site design with integration on a Word Press CMS. I actually think the design work is awesome but without the access I am used to for doing my work, it makes it difficult to make adjustments as I need to.
-
Unfortunately, if you really have no access at all, there's isn't much you can do. The best alternative to a canonical tag, in most cases, is a 301-redirect, and you'd need some kind of access for that, too (hosting account, server access, .htaccess rights, etc.).
It depends a lot on the situation, of course. If you're just trying to get some bad URLs out of the index, you could try parameter blocking in Google Webmaster Tools. If you have Robots.txt access, that might open up some other options (although it's limited and only an alternative in a couple of cases).
I assume this is some sort of CMS system or a hosted solution?
What are you trying to achieve/solve with the canonical?
-
Thanks for responding, already asked and they won't budge.
They also are using some of my seo nuances on a competitive site in the same market. Don't trust them any more with those seo details so hoping for other ideas.
-
As far as I know, there is not a way to do this. It's also kind of really strange they won't open up the template to be altered. Could you ask them for access - or just provide them the code to use?
Even if there WAS a way to use rel=canconical in a nonstandard way - I don't think you would want to do that - as it may not be supported across all engines.
http://www.google.com/support/forum/p/Webmasters/thread?tid=64f490887853e7a2&hl=en
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Canonical tag refers to itself (???)
Greetings Mozzers. I have seen a couple of pages that use canonical tags in a peculiar way, and I wanted to know if this way of using the tags was correct, harmless or dangerous: What I've seen is that on some pages like: www.example.com/page1 There's a canonical tag in the header that looks like this link href="http://ww.example.com/page1" rel="canonical" It looks as though the tag is "redirecting to itself", this seems useless (at least to me). Is there a case where this is actually a recommended practice? Will using the canonical tag in this way "hurt" the page's ranking potential? Cheers Jorge
Technical SEO | | Masoko-T0 -
Header Tag Question
While reviewing code on a site, I found the following: <h1 class="<a class="attribute-value">logo</a>"> <a id="<a class="attribute-value">logo</a>" href="[http://siteexampleh1.com](view-source:http://dmbinc.com/)"><span>Example of most important content on this page- Companyspan>a> h1> Is this the correct way to place code for an h1 tag? The content is cached within the page and is hidden to the viewer. The content that is assigned as the h1, is a logo. Majority of code I have been reviewing does not use this setup. The code would instead read as ( This is heading 1 ). Can anyone provide insights on this? Thanks!
Technical SEO | | jfeitlinger0 -
Canonical Tag - Magento - Help
Hello, I was hoping to get some help or tips on how to best control the canonical tag on a Magento based website. When you go into the Magento admin and enable the option to use the canonical tag on pages, all that does is input the canonical tag to the exact page just with the http:// in the url. My goal is to use the canonical tag on specific pages and point it to other pages, not just the same page with an http:// For example, right now for page: example.com/question/baseball the canonical tag is pointing to http://example.com/question/baseball What i want is to be able to do is take: example.com/question/baseball and have the canonical tag point to example.com/question/baseballbats Is this possible? Does what I'm saying make sense? Please let me know what you all think.... Thanks!
Technical SEO | | Prime850 -
Blog article URL - with or without date?
Quick question to all you folks: does including the date in a blog article's permalink affect rankings? For example, here's an article with the month and year, as well as the blog title: http://www.ayzanyc.com/blog/2012/12/difference-between-hot-chocolate-hot-cocoa/ Is it better to omit the date and just put the blog title? Also, if is better to avoid using the date, is it worth it to change the link structure of our previous articles (given that the URL will now be different), or should we just focus on future articles? Thanks ahead of time for your advice.
Technical SEO | | onurkiyak0 -
Are my canonical re directs working?
Buonjourno from Wetherby UK 🙂 Ive been battlling sometime to get this site http://www.goldsboroughestates.co.uk to rank for term Right To Manage. Amongst other tactics ive set up a canonical http://www.goldsboroughestates.co.uk/about/right-to-manage.aspx * - Canonical version http://www.goldsboroughestates.co.uk/how-we-care-for-you/right-to-manage.aspx http://www.goldsboroughestates.co.uk/what-our-customers-say/right-to-manage.aspx http://www.goldsboroughestates.co.uk/ - But has this canonical redirect feature worked? The reason i doubt it is i notice when i enter a page http://www.goldsboroughestates.co.uk/what-our-customers-say/right-to-manage.aspx which has the below code in place: rell="canonical" href="http://www.goldsboroughestates.co.uk/About/right-to-manage.aspx/" /> It does not jump to http://www.goldsboroughestates.co.uk/about/right-to-manage.aspx So my question is... "is the canonical redirect working or not & waht is the best way / tool for diagnosing a canonical error" Grazie tanto,
Technical SEO | | Nightwing
David0 -
Any Positive Experiences with Rel=Next Rel=Prev for pagination?
Hi Mozzers! Can you share your experience and observations in implementing rel=next rel=prev on sites you've worked on?
Technical SEO | | SparkplugDigital0 -
Rel Canonical Question
I changed /tulsa-cleaning-services/ to /services/ because the URLs were getting too long. Now I'm getting an error for Appropriate use of Rel Canonical. I used a 301 to send old links to the new location. Any ideas? Thanks! Will www.americancarpetclean.com
Technical SEO | | WillWatrous0 -
Rel Canonical - Wordpress
How do you fix the rel canonical issue on a wordpress site? Is there a quick fix? I have a few notices on my site and am a little confused. Thanks, Jared
Technical SEO | | SaborStyle0