Help with GA Filters - IP Addresses
-
I'm having a hard time filtering out both of the IP addresses at our office. One is easy with regular expressions, but the other one does not seem to be working.
Here are the two IP addresses:
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86
174.99.90.148I set up these two custom filters and neither worked for the longer IP address.
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86|174.99.90.148
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86|174.99.90.148Would you please help steer me in the right direction? Thanks as always MOZ friends!
-
Figured it out fully! This is how I needed to write the filter to have both in a regular expression:
174.99.90.148|^2606:a000:4e2b:d500
Thanks again everyone for steering me in the right direction!
-
Not sure why, but it looks like we just have to have separate filters for ipv6 versus ipv4s... works that way, but not combined for whatever reason.
Thanks for the help everyone!
-
I would agree with Dmitrii again on this one. For ipv6 there shouldn't be a need for regex as there are no '.' characters and ':' does not cause a regex function. You might want to consider simply segmenting the ipv4 and ipv6 as two different filters? I know this defeats your purpose of using one filter to catch them all but the problem you are facing may be caused by trying to group ipv6 and ipv4 in the same filter.
Try doing them separately and let us know if that solves the issue of correctly filtering the ipv6 traffic while using the pipes to join multiple ipv6 in one filter.
-
If you are creating filter just for one IPv6, why to you use regular expression at all? Just input it as it is.
-
I'm no longer getting the error, but for whatever reason putting them together is not filtering them out. What it looks like I need to do is create a custom filter and determine how to put the ipv6 in as a regular expression, which I do not understand how to do. Do you know?
-
The solution Dmitrii proposed has also worked for me with no invalid IP address error.
Can you confirm that this is still not working for you and provide a screenshot if possible?
-
It worked for me. I just checked. Are you doing it in custom, rather than predefined?
-
When I put that in it tells me that it's an invalid IP address...
-
It should be
2606:a000:4e2b:d500:61d9:9d4e:c539:ea86|174.99.90.148 -
It does work when I set up a predefined filter blocking IP, but only for that one ipv6 - when trying to add both it isn't working and I'm hoping to only have one filter that blocks multiple IPs... thoughts?
-
Again, is it working if you create a filter just for ipv6?
-
Basically, what I'm trying to do is build the functionality to have all of my IP addresses, both IPv4 and IPv6 in one GA filter. I selected a custom filter to exclude IP addresses that are equal to the below expression, but it's not working for the IPv6. Can someone tell me what's wrong with this setup?
174.99.90.148|2606:a000:4e2b:d500:8519:4fcb:8bf0:78d7
I'm pretty sure the regular expression is incorrect for the IPv6, but I don't know how to do it and cannot figure it out through research.
Thanks as always MOZ friends!
-
Well, try ipv6 by itself first. Make sure it's working, eliminate the variables, you know. If it works by itself, then you can start digging into regular expressions (even though it should be simple ipv6|ipv4 without escapes). Who knows - maybe fault is not in regular expressions, but address is wrong or something.
-
I'd like to put all of these IP addresses in one filter instead of several, which requires a regular expression. These IPs are ours, but I also want to add different partners' IP addresses on their sites. We work with about 50 different websites and I'm hoping to have this as just one of the filters. The regular expression works for the non-IPv6 (thanks!) IP, but the IPv6 one is not filtering.
Make sense? Thanks again for the help!
-
IPv6 is that long IP address.
Simply go to filters in GA, find predefined filter, choose exclude, choose "traffic from IP addresses" and paste your IP, which is 2606:a000:4e2b:d500:61d9:9d4e:c539:ea86.
-
Pardon the lack of knowing, but what is ipv6? How does that filter look in the GA filter? Thanks!
-
Hi there.
You should be able to exclude both IPs without any escaping. What I'd recommend is to create a filter just for ipv6 and see if exclusion works. Let me know if that works.
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
How to filter blog pageviews using segments with regex
I must be overcomplicating this. I have a website with a blog structure that includes year subfolders, so: website.com/2019/blog-title, website.com/2018/blog-title, website.com/2017/blog-title, etc. I want to create a segment that I can apply in Site Content > All Pages to get quick stats for all blogs, regardless of year. (Pageviews, time on site, etc.) Unfortunately, Content Drilldown doesn't work well here as it is grouping by each year. I have tried setting up a segment using regex, but am getting a mixture of all pages, not just blog pages. I have set up the segment the following way: Advanced > Conditions > Page, Matches Regex, /2019/(.*?)/ Advanced > Conditions > Page, Matches Regex, /2018/(.*?)/ Advanced > Conditions > Page, Matches Regex, /2017/(.*?)/ Am I going about this all wrong? Is my regex wrong? Any advice is appreciated! Side note: glaringly obvious that now is the time to clean up my URLs. But I'd still love to see the data in its current URL state. Thank you!
Reporting & Analytics | | SoleGraphics0 -
GA Internal Site Search Correct Query Parameter?
Hi Guys, Recently added GA internal site search to a sub-folder: http://tinyurl.com/jhm9cyl Just want to confirm would the query parameter be: /search/ Or different because it's a sub-folder? Cheers.
Reporting & Analytics | | jayoliverwright0 -
Help Blocking Crawlers. Huge Spike in "Direct Visits" with 96% Bounce Rate & Low Pages/Visit.
Hello, I'm hoping one of you search geniuses can help me. We have a successful client who started seeing a HUGE spike in direct visits as reported by Google Analytics. This traffic now represents approximately 70% of all website traffic. These "direct visits" have a bounce rate of 96%+ and only 1-2 pages/visit. This is skewing our analytics in a big way and rendering them pretty much useless. I suspect this is some sort of crawler activity but we have no access to the server log files to verify this or identify the culprit. The client's site is on a GoDaddy Managed WordPress hosting account. The way I see it, there are a couple of possibilities.
Reporting & Analytics | | EricFish
1.) Our client's competitors are scraping the site on a regular basis to stay on top of site modifications, keyword emphasis, etc. It seems like whenever we make meaningful changes to the site, one of their competitors does a knock-off a few days later. Hmmm. 2.) Our client's competitors have this crawler hitting the site thousands of times a day to raise bounce rates and decrease the average time on site, which could like have an negative impact on SEO. Correct me if I'm wrong but I don't believe Google is going to reward sites with 90% bounce rates, 1-2 pages/visit and an 18 second average time on site. The bottom line is that we need to identify these bogus "direct visits" and find a way to block them. I've seen several WordPress plugins that claim to help with this but I certainly don't want to block valid crawlers, especially Google, from accessing the site. If someone out there could please weigh in on this and help us resolve the issue, I'd really appreciate it. Heck, I'll even name my third-born after you. Thanks for your help. Eric0 -
Can't identify the real source of a goal because subdomains in GA
Hello, I have one domain for my website (www.domain.com) where I receive all the new traffic and a subdomain (billing.domain.com) for the billing system. Im tracking both in Analytics. I have a goal (new order) configured in the subdomain -billing system-. But when I want to track the source / medium of the goals (new orders) in billing.domain.com, always appears my main website (www.domain.com) as the referral. Now I added in Analytics: Admin > Property > Referral Exclusion List, the www.domain.com and domain.com. Do you think that now I can track the real referrer of the goals? Or should I do a more complex tracking setup with Tag Manager ( https://support.google.com/tagmanager/answer/6106951 ) to pass the session cookies from a subdomain to another one, just to identify the real source / medium of the visitor? Thank you 🙂
Reporting & Analytics | | estebanseo0 -
Has GA changed how it calculates bounce rate?
Updated website from Magento backend to Wordpress and since the redeploy, my bounce rate has dropped from 40% to 4%. I did check to see if there was duplicate GA tracking code but only one call. I checked reports under "visitor flow" and one page visits seem inline with the previous bounce rate. Weird. Never experienced this before.
Reporting & Analytics | | Timmmmy0 -
Webmaster tools help
Looking at some Google Webmaster tools data and im a bit stumped. Can anyone tell me if the "not selected" pages should be taken from the "total indexed pages" or are they a seperate entity? The way the data is displayed on the graph leads you to believe they should be taken from the total indexed pages, yet Googles own description of "not selected" pages says that these pages are not indexed. Confused.
Reporting & Analytics | | Silkstream0 -
Do Google Analytics filters affect link building?
We recently made a few link wheels for specific product pages. We've been having great results with all of the wheels except for one. The one we are having issues with is the only link that we were using a Google Analytics filter on; it looks like this http://domain.com/page.htm?zSource=Specific Keyword%tracking My question is does Google ignore links that are obviously utilizing their analyitcs custom filters? We're doing some more testing to try to find out if it truly is the link or if the wheel is a bad one. There are so many things that could go wrong but with so many of our link wheels working well, I wonder if the filters are what is causing such results.
Reporting & Analytics | | MichealGooden0 -
GA dropping source due to 3rd party checkout?
So I am trying to track ecommerce transactions on a Prostores site and GA is dropping the source because the checkout is on prostores domain instead of the store domain. All ecommerce transactions show a source of the actual website as a referral. I've read googles documentation on tracking across multiple domains but just can't quite get it right. Can anyone help me out? Here is my tracking code: ss:commentdo nothing</ss:comment>
Reporting & Analytics | | BlinkWeb0