Filters for referral bots ineffective
-
I'm not sure what I'm doing wrong here. I've been trying to block spam from my client's analytics for over a month and I just can't seem to get it right. I am beyond frustrated.
Here is a list of the filters I have:
And here is referral traffic from them regardless:
Specifically this is what the filter looks like. Am I doing something wrong here?
I have also put a filter in place to block traffic from Russia, and it doesn't seem to be working 100% either.
On top of that, it seems anytime I do manage to block something, another site just pops up in its place. Is it endless?
My clients are very small local business and this is absolutely ruining their analytics. I can't even show them their traffic reports since it's absolutely meaningless with all this spam. Any help would be greatly appreciated.
-
Thank you for the quick response. Made the changes you suggested and hopefully over the next few days I'll see the effect.
-
The filter verification takes a small sample of data and sometimes in that sample there won't be any change.
Another reason for what you may get this error is because the filter was saved before the verification, so you will have to delete the filter and create it again for the verification to work. Better yet you can use the filter expression in a segment it will give you a better idea of how the filter will work since the segment is not limited to a few days.
If you try to exclude by the offender don't use referral as a filter field use Campaign Source.
For the filter based on valid hostnames, there is no need to put the domain with and without "www" clientsite.com will match both.
Hope that helps,
-
I've tried the method you suggested for one of my client's sites. I created a new filter, did "Include" -> "Hostname" and added the following:
translate.googleusercontent.com|www.clientsite.com|clientsite.com
It said that it wouldn't change any of the data when I went to verify the filter, which should not be the case. Most of the traffic is from hostnames that are not set. I tried this input as well after reading a different article on the subject:
translate.googleusercontent.com|www.clientsite.com|clientsite.com
Once again to no effect.
So I tried to tackle the referral spam itself (although for this particular site, direct traffic seems to be getting a fair amount of spam as well). I created two filters ( http://imgur.com/ShhAYqv ) that included every spam referral I've ever gotten:
adviceforum.com|social-buttons.com|semalt/.com|free-share-buttons.com|buttons-for-website.com|best-seo.com|darodar.com|semalt.com
dailyrank.net|sitevaluation.org|trafficmonetize.org|4webmasters.org|100dollars-seo.com|webmonetizer.com|event-tracking.com|.*(social-buttons.com)
And, as you can see in the picture, it says there would be no effect.
Aghhhhhh! What am I doing wrong here?
-
I have recently followed Carlos' blog posts and have to say the steps worked a treat. Hopefully the Google Analytics team are working on a way to transfer filters across different analytics accounts to make it easier to keep all sites referral traffic free.
-
Hi Kat,
If you want to exclude the spammer you should use Campaign Source as a field type, instead of predefined filter use:
- Filter type Custom > Exclude
- Filter Field > Campaign Source
- File Pattern Box enter the spammer you want to exclude. You don't need to create a different filter for each one; you can create an expression like this:
4webmasters.com|free-share-buttons.com|trafficmonetize.org|morespammers
The backslashes before the dots "." and the dashes "-" are needed because custom filters use Regular Expressions. You can keep adding up to 255 characters after that you have to create another filter
If you want to try a better solution, I recommend you to try a filter based on your hostnames.
This solution requires a little more time to set up, but it has three huge advantages over the Campaign Source solution- You will stop the spam before it hits you, adding a filter for the referral after you see it will stop it, but by the time you apply it you will have already hits of the spam.
- You will need only ONE filter to stop all ghost spam, instead of creating various sets of filters.
- Lately, some of the spammers(e.g. free-social-buttons) have been hitting GA accounts with fake direct visits along with the referral, the filter for the referral won’t stop the direct visit, on the other hand. The Valid hostname filter will stop ghost spam in any form whether it shows as a referral, keyword or direct visit.
This is what I've been using on my accounts for, the last moths and I haven't received a single hit of ghost spam the vast majority.
Here are a detailed guide and more information about all these solutions and spam in Google Analytics.
http://www.ohow.co/what-is-referrer-spam-how-stop-it-guide/
Hope it helps,
-
I've tried setting up filters in the manner you explain on your site, and yet when I go to verify it, it says that it wouldn't affect my data. I most certainly have spam data from the last seven days so I'm uncertain why it's not working.
I entered in names just as you did in your article, excluding from a campaign source:
dailyrank|sitevaluation|trafficmonetize|4webmasters|100dollars-seo|webmonetizer|event-tracking|free-social-buttons
-
You need to set the exclusion for campaign source, and not the ISP domain.
I highly recommend setting an include only filter for your own hostname.
https://www.marceldigital.com/blog/2015/06/stop-ghost-spam-in-google-analytics
Browse Questions
Explore more categories
-
Moz Tools
Chat with the community about the Moz tools.
-
SEO Tactics
Discuss the SEO process with fellow marketers
-
Community
Discuss industry events, jobs, and news!
-
Digital Marketing
Chat about tactics outside of SEO
-
Research & Trends
Dive into research and trends in the search industry.
-
Support
Connect on product support and feature requests.
Related Questions
-
Help setting up FILTERS for External Payment pages?
Hi all, I own a webshop and believe my Google Analytics is not showing true data. At the moment when a user pays for their basket, they are redirected to an external secure payment page from my PSP, then after they have paid they are redirected back to my website. How is this visitor being counted? As the PSP-URL is a different site I assume this would be treated as an exit? Can I setup FILTERS to INCLUDE this URL so GA doesn't think its an external page or is there a better way? Thanks
Reporting & Analytics | | darrenbooy0 -
Is Google doing anything about the spam referrer plague in Google Analytics?
My client manages 15+ websites and we have observed the spam referrer issue has gotten steadily worse and worse in the last few months. I took the time to weed out the worst offenders via traffic filters but our referral traffic source garden was quickly full of weeds again a few weeks later. Does anybody know what the Google Analytics development team is doing to combat the spam referrer issue? I find it quite amazing that Google goes through the asinine effort to block out organic keyword data ("not found" & "not provided) but they don't seem to care about blacklisting/filtering spam referrers. RHnE6Wx
Reporting & Analytics | | RosemaryB3 -
Some goal conversion in Google analytics showing under referral
Yesterday I have created Google analytics account for a new website but few goal conversions comes from payment gateway site (paypal.com, epdq.co.uk) and showing under referral. How to fix this issue so I can know the real source of Goal conversion. *Note - utm_nooverride=1 on thank you page applied, payment gateway URL is already placed in Referral Exclusion List. So please don't suggest either of them. Thanks
Reporting & Analytics | | Alick3000 -
Google referral traffic drop around 14th July 2014 (UK). Anyone else seeing it?
We've seen around a 25% drop in Google referral traffic from the 14th July 2014 onwards and having real trouble identifying why and from what search terms we're being effected. WMT and Moz Pro don't show any movement. Is anyone else seeing the same thing on UK search terms? Seems a bit late to be the effect of Panda 4.0? Any help would be amazing. Thanks.
Reporting & Analytics | | whis1 -
Not Provided Filter is not tracking goals
I have setup ‘Not Provided’ filter, but it is not tracking conversions accurately. Basically the filter displays goals url’s as conversion urls & not the landing url’s. For example – I would expect home page to have maximum conversions, but its shows higher visits & no conversions. Has anyone experienced this? I have attached screenshot of the ‘Not provided’ Filter. 0L0fS3h SxzRP7w
Reporting & Analytics | | mozwoz0 -
Google Custom Report Filters are a pain in the arse
Greetings from high weed pollen count Wetherby UK 🙂 Ok ive been having extreme custom reporting filter frustration with Google analytics. My objective was to set up a "custom" google analytics report that detailed: 1. Referral traffic from external sights in one reporting tab
Reporting & Analytics | | Nightwing
2. Visitor generic traffic report including direct, search & referral traffic e.g: http://i216.photobucket.com/albums/cc53/zymurgy_bucket/reporting-tabscopy.jpg But Ive hit the provebial buffers 😞 Initailly i added an advanced filter as shown here: http://i216.photobucket.com/albums/cc53/zymurgy_bucket/custom-reporting-with-filtercopy.jpg but the advanced filters do not stick / save. As soon as you exit the custom report the advanced filter is cleared as shown here: http://i216.photobucket.com/albums/cc53/zymurgy_bucket/custom-reporting-filter-removedcopy.jpg I then added a filter under a specific custom tab but the filter cascades into all the reporting tabs see below: http://i216.photobucket.com/albums/cc53/zymurgy_bucket/custom-reporting-cascading-filterscopy.jpg So my question is please... "How do can you set up filters that effect the data in one reporting tab and does not cascade into the others" Any insights welcome 🙂0 -
Traffic Down for Most Referrers - not just Google
Our traffic has taken a severe hit, over the past 3 weeks - down about 60%, which I had assumed was caused by the Penguin update. However on closer inspection of our analytics, our traffic is is down by between 30 and 50% for nearly all our referrers - including Bing and other search engines, referring sites, and even direct traffic! Google provides the vast majority of our traffic, so in terms of the absolute visitor count, the drop in Google traffic has the biggest effect - by some distance. But the fact that traffic is down by similar percentages suggest that Penguin isn't the cause of our troubles at all. We sell garden products in the UK, and it's just coming into peak season. Last year, May was one of our top months, External conditions - such as the very wet weather over the past month, economic gloom and doom - don't begin to explain this sudden and dramatic drop in traffic. We are very perplexed. If anyone has any bright ideas, I'd be interested to hear them. Ben
Reporting & Analytics | | atticus70 -
How to filter pages in Analytics by multiple criteria
Hello, we have several pages with the same page title. Now out of all those pages I want to pick two. Let's call them "/page1" and "/page2". For those pages I want the following information (combined for both): Avg. time on page, Bounce rate, Navigation Summary Normally I get all the information under "Content" "Pages" and by choosing the "page title" as primary dimension and clicking on the respective page title. Let's call it "page | title". Choosing the filter for 1 page works fine (I just enter "/page1" in simple filter). But how can I filter for two pages ( entering " include page ends with /page1 and include page ends with /page2" in the advance filter will show 0 results). Thanks in advance
Reporting & Analytics | | guitarslinger0